2450gph / 13000lph flow rate Single 90mm inlet Filters to 58 micron Gravity or pump fed Designed to wash from mains pressure (down to 2 bar) 11 watts standby / 28 watts wash 12 volts DC waterside electrics Simple plug and play design Polypropolene / stainless steel construction Totally modular – all parts user replaceable Optional bolt on wash pump (for low water pressure areas)
With high demand from people agreeing with what we set out to achieve with the Origin unit we adapted it to create the Draco2.
Fits in Nexus 200 series units, vortexes between 24" & 33" and multibays.
Dimensions – 450mm wide x 396mm long x 420mm depth
Height above water level – 170mm
Capacity – 2,450 Imp. Gallons per hour / 11,100 litres per hour (in gravity mode, pump fed less 25%)
Pond Volume – Approx 4,000 UK gallons
Overall Technical Data
Filters down to 58 microns Can be used without a pressure wash pump – wash cycle runs off a normal garden hose with a minimum pressure of 2.5 bar with good flow. Power used when active – Standby 11.5 watts. Active 35 watts. Active with optional pressure pump 78 watts All electrics on the drum itself are 12v DC Drive system comprises direct gearing to the back of the drum minimising complexity, the sealed motor unit is mounted on a single pivot swing arm as a safety feature to stop foreign bodies jamming the system Simple installation via multiple types of adaptor plate which are interchangeable Single, pre-wired connection from controller to drum. Just plug and play Ability to site controller up to 4 metres away from the unit Status of controller is available via simple, high intensity, colour coded LEDs and a digital minutes between washes display Easily accessible water level sensors that can be adjusted to accommodate any situation All parts are modular and are replaceable in the event of any damage or failure Wholly designed and built in the UK by DracoDrum